Getting to know the internal workings of the control valve

by Thomas E.

The main use of the control valve is to regulate the flow rate of a liquid or gas. It is used to control the temperature, pressure, and liquid control in the entire production process.

While working with the control valve, the time of specification simply means determining the size of the valve in question. The main use and importance of the control valve are to regulate the flow conditions and the expected flow rate.

In this article, our main aim is to show you the various industrial importance of using the industrial valve.

Let’s dive in.

· It improves production efficiency.

Because of the entire functionality and structure of the control valve, the actuator design is a diaphragm design. The control head controls the actuator.

One thing you need to know is that compressed air is a very expensive commodity. There is a lot of energy expenditure required to generate compressed air.

In the production process, the manufacturing line will be equipped with valves going straight into the atmosphere leading to a massive loss in energy.

When trying to create your design to fit into the process, you need to ensure that design is a cost-effective solution. In recent times, digital valves have been created to control the airflow out of the actuator. These digital valves have shown to improve the efficiency of the entire operation.

· It improves Safety.

One thing you need to know about control valves is that they operate within the 40-85% range. So if the valve is set and commanded to 10%, it will be able to detect that something is wrong with the control system. If there is a problem involved, the machine will be demanded to close up completely.

The modern control valve acts as a safety device to prevent damage to the pipework. A fail-safe system will be built for closing the value whenever the valve condition goes below the required threshold.

· It helps to improve reliability.

The proper collection and installation of the control valve help to improve the reliability of the pump. Most systems in manufacturing do not offer proper conditions in terms of reliability.

In this machine, they often deal with a lot of corrosive chemicals which often tend to shorten the life span of the machine. Regular cleaning of the control valve is very important to improve the reliability of the machine.

Working with the pneumatic control valve comes with a lot of great results. It is one of the best when it comes to providing a flow of control in the valve.

One thing you need to know is that this controlling valve is responsible for controlling the amount of air, and the air pressure moving through a pneumatic system.


The control valve is one of the most important components of the process control system. This system is one that cannot be taken out become of the major functions it has on the machines.

Getting the right pneumatic control valve is not an easy process. However, some great vendors will lead you to achieve the best results.

You may also like

Leave a Comment